<u id="v2CXv"></u>
产品品牌：
产品型号：
characteristic:
1. All liquid silica gel products can be produced and processed with different types of equipment of Jiechen, and different colors can be added according to user requirements;
2. The equipment is equipped with modern SPS control system, and the machine can be operated easily through several switches and buttons;
3. The switch contact can avoid material shortage and overpressure or low pressure;
4. Pigments and additives are mixed in the mixing module of the feeder, which results in the shortest flushing path, which also reduces the material loss.
5. The use of direct feed, so that air can not enter the pipe, no exhaust, greatly reduce the waste of raw materials and labor, can effectively eliminate the problem of AB ratio caused by raw material barrel deformation, unique design to ensure a stable feed ratio of 1:1.
Applicable production scope:
1. All the liquid silica gel injection molding machines are equipped to complete the A and B rubber pumping and feeding operations.
2. Electronic products, auto parts, medical supplies, adult products, maternal and infant products, kitchen and bath supplies, diving supplies, etc.
Technical parameters of liquid silica gel feeder
| 项目/PROJECT | 单位(wei)/UNIT | 参数/PARAMETER |
| 送料压力 | Mpa | 0-20 |
| Feed pressure | ||
| 输出量 | g/min | 3500 |
| Output quantity | ||
| 供料系统 | L | 20/200 |
| Feeding system | ||
| 功率要求 | V/HZ KW | 380/50 2.2 |
| Power requirement | ||
| 混合(he)比例 | A:B | 1:1 |
| Mixing ratio | ||
| 比例(li)精(jing)度 | AB | ±1% |
| Ratio accuracy | ||
| 空气压力 | kgf/cm2 | 6 |
| Air pressure | ||
| 输配管 | M | Φ3/4*2.7 |
| Transmission and distrbution | ||
| 理论(lun)机重 | T | 960 |
| Machine weight | ||
| 机器尺寸 长*宽*高(gao) | M | 1.3*1.05*2.3/3.1 |
| The machine size L*W*H |
<u id="v2CXv"></u>